Step 2 Tap in the upper right corner of the screen.
Step 3 Enter the alarm time and tap OK.
NOTE
If you have set the system time of eSpace 8950 as 12-hour time, you need to select AM or PM when setting the
alarm time.
The alarm you have set is displayed on the Alarms screen.
l To enable or disable an alarm
Tap the enable/disable switch on the right side of an alarm.
l To edit the alarm time
Tap the alarm time you want to edit, and enter the time you want.
l To add a label for an alarm
Tap the arrow under the enable/disable switch, tap Label, and enter the label name you prefer.
l To set repeated alarm time
Tap the arrow under the enable/disable switch, select REPEAT, and set the alarm time.
l To change the alarm sound
Tap the sound name and select the sound you prefer.
----End
Setting the Alarm Sound Parameters
Step 1 On the Alarms or Clock screen, tap and select Settings.
Step 2 In the ALARMS area, tap and set the alarm parameters you want to modify.
l Silence after
Select the duration of the alarm sound.
l Snooze length
Select the alarm snooze duration.
l Alarm volume
Adjust the alarm volume.
l Volume buttons
Select the operation that you want the volume buttons to execute: snooze, stop, or no
operation.
----End
Deleting an Alarm
Step 1 Tap and hold an alarm until it turns blue.
Step 2 Tap
in the upper right corner of the screen.
Step 3 In the dialog box that is displayed, tap OK.
----End
eSpace 8950 IP Phone
User Guide
26 Applications
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
85
To Next Page
Loading...
