Huawei eSpace IAD - Page 78

eSpace IAD
Troubleshooting
3 Common Troubleshooting Methods
Issue 02 (2012-02-29)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
IAD2000(config)#display alarm history alarmid 0x06020007
Command:
display alarm history alarmid 0x06020007
ALARM 269 RECOVERY WARNING 0x06020007 COMMUNICATION 2010 -12 -09 10:25:16
ALARM NAME : Network-autocheck restore
PARAMETERS : netcheck-ip : 192.163.1.8
DESCRIPTION : Network-autocheck restore //Restore indicates network resumption
CAUSE : Network restore
ADVICE : Need no process.
--- END
Step 7 Run the command to query the users' registration state. The state is registered.
The command is as follows:
TERMINAL(config)#display sip attribute 0
Sip User Information
-----------------------------------------------------
user-sn : 0
id : +8657187900066
password : ********
name : +8657187900066@ssg.comcast.net
local address : 192.163.1.47
local-port : 5060
registration state : registered //The user is registered
expire-time : 0 sec
previous server :
current server : 192.163.1.8 : 5060
dm match delay : 0 ms
digit-map position : remote
dial-delay position: remote
support no pound : off
group id : -
......
TERMINAL(config)#display sip attribute slot 0 port 0
Sip User Information
-----------------------------------------------------
user-sn : 0-0
id : 81151
local address : 192.163.1.26
registration state : registered
expire-tim e : 120 sec
previous server : -
current server : 192.163.1.8 : 5060
local-port : 5060
name : -
password : ********
dm match delay : 200 ms
digit-map position : remote
dial-delay position: remote
support no pound : off
group id : -
port type : FXS
ShortNum : -
-----------------------------------------------------
----End