EasyManua.ls Logo

Huawei FusionDC1000A - Smoke Sensor

Huawei FusionDC1000A
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
electrical actuator of the re extinguisher cylinder. Then the cylinder valve is
opened, and extinguishant is released into the protected zone.
Peruorohexanone (FK-5112) is a colorless, odorless, and non-conductive gas
extinguishant free of secondary pollution. It features cleanness, low toxicity, good
electrical insulation, and high re extinguishing eciency.
Figure 7-6 Fire extinguisher
Table 7-2 Technical specications of the peruorohexanone re extinguisher
Item
Specications
Dimensions (diameter x height) 300 mm x 706 mm
Startup current 1 A
Startup voltage 24 V DC
Startup mode Electromagnetic and manual
Maximum operating pressure 2.9 MPa
Storage pressure 20°C: 2.5 MPa
Cylinder volume 38 L
Operating
environment
Temperature –20°C to +55°C
Humidity ≤ 95% RH (non-condensing at 40°C)
7.4 Smoke Sensor
Smoke sensors are used to detect the smoke concentration.
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 7 Fire Extinguishing System
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 105

Table of Contents

Other manuals for Huawei FusionDC1000A

Related product manuals