Indicator Status Description
Blinking
at short
intervals
The communication is interrupted or the ECC800-Pro is
unsuccessfully registered (blinking at 2.5 Hz, on for 0.2s
and then o for 0.2s).
Blinking Blinking at super short intervals for 0.5s and then o for
0.5s; last 10s (blinking at super short intervals: 10 Hz,
on for 0.05s and then o for 0.05s)
ALM Steady
on
A system fault alarm is raised.
O The system is normal.
Table 6-22 BLINK button description
Function
Description
Operation
Description
Indicator Status
Blinking Press the button for
less than 2s.
The RUN indicator blinks at super
short intervals for 0.5s and then o for
0.5s; last 10s (blinking at super short
intervals for 10 Hz, on for 0.05s and
then o for 0.05s).
6.4 Smart ETH Gateway
A smart ETH gateway allows the extension of the 53.5 V DC power supply and FE
communication for the ECC800-Pro and can be exibly deployed.
Figure 6-10 Smart ETH gateway
(1) PWR_IN cascading
power port
(2) FE_1 cascading
signal port
(3) PoE_1–2 ports (4) PoE_3–4 ports
(5) 48V_OUT1 power
output port
(6) 48V_OUT2 power
output port
(7) FE_2 cascading
signal port
(8) PWR_OUT
cascading power port
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 82
To Next Page
Loading...
