Huawei FusionDC1000A - Interior Layout

Item Technical Specications
Installation space ● 42 U available space
● The distance between the front and rear
mounting bars can be adjusted for every 25
mm.
– For a 1200 mm deep cabinet: The
maximum depth for installing devices
inside the cabinet is 750 mm and can be
extended to 850 mm by adjusting the
mounting bars.
– For a 1100 mm deep cabinet: The
maximum depth for installing devices
inside the cabinet is 700 mm and can be
extended to 750 mm by adjusting the
mounting bars.
– If the depth of the equipment exceeds
the specications, the cabinet needs to
be customized by raising RM
requirements.
● Positions for vertically installing two rPDUs
are provided in the rear of the cabinet.
Installation mode
Supports installation on a base and raised
oor.
Door opening mode The front door is a single door, and the rear
door is a double one.
Weight of an empty cabinet ● 2000 mm x 600 mm x 1100 mm: 110 kg
● 2000 mm x 600 mm x 1200 mm: 130 kg
NOTE
The weight of an empty cabinet includes the weight
of the front and rear doors.
IP rating IP20
3.6.4 Raised Floor
The raised oor is installed at the smart cooling product side to facilitate pipe
routing for smart cooling products.
● The raised oor consists of ooring, legs, beams, and conductive rubber pads.
● The oor does not dislocate or deform after long range transportation, and is
easy to assemble and maintain.
● The legs can be adjusted in height, and are galvanized to provide ecient
anti-corrosion performance.
● The compression strength of both the raised oor and legs is greater than
1500 kg/m
2
.
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 3 Structural system
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 17