EasyManua.ls Logo

Huawei FusionDC1000A - Page 71

Huawei FusionDC1000A
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 6-1 Management system networking diagram
NO TE
Common card readers are congured for the access control system by default, and they
should be used at an ambient temperature ranging from –40°C to +85°C. Customized
three-in-one ngerprint and card readers with keypads are also supported, and they
should be used at an ambient temperature ranging from –10°C to +55°C. The three-in-
one card readers cannot be used outdoors when the ambient temperature is below –
10°C or exceeds 55°C.
The camera uses an SD card with a capacity of 64 GB for storage by default, and
supports 7x24 recording at 720P/512K. A video management device (IVS) should be
congured if there is a need of longer-time storage, management, and conguration of
external cameras.
Scenario without an IVS: Connect the signal cables of the indoor and outdoor cameras
to the PoE ports on the smart ETH gateway.
Scenario with an IVS: Connect the signal cables of the indoor and outdoor cameras to
the LAN switch.
Table 6-1 Management system congurations
Function
ECC800-Pro NetEco
Client
authorization
16 PCS One license manages up to 25 smart nodes.
Work order
management
No Yes
Energy eciency
management
Yes Yes
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 64

Table of Contents

Other manuals for Huawei FusionDC1000A

Related product manuals