Huawei FusionDC1000A - Page 77

Item Specications
USB ● Supports USB 2.0 and 5 V/1 A power supply.
● A WiFi module can be installed at the port. After the
installation, connect to the ECC800-Pro using the app on the
mobile phone or PAD to view the basic information about
the smart module, such as layout, resources, energy
eciency, environment, and alarms.
● You can insert a USB ash drive to export historical data
and conguration les and import conguration les.
NOTE
● A WiFi module can be installed only at the USB port on the main
control module (02312QAA or 02312QAA-001).
● This port is protected by a security mechanism.
WiFi Supports wireless communication, complies with IEEE
802.11n/g/n, and works at 2.4 GHz.
SW button ● Restores the default IP address, local default settings, and
user management information.
● Clears devices that failed to communicate, historical alarms,
and performance data.
● Supports RF_Z (802.15.4) networking.
Table 6-4 ECC800-Pro environmental specications
Item
Specications
Operating
temperature
–20°C to +50°C
Storage temperature –40°C to +70°C
Relative humidity 5%–95% RH (non-condensing)
Altitude 0–4000 m (When the altitude is between 3000 m and
4000 m, the temperature decreases by 1°C for each
additional 200 m.)
Table 6-5 ECC800-Pro structural specications
Item
Specications
Dimensions (H x W x D) 43.6 mm x 442 mm x 330 mm
Weight 7.5 kg (dual PSUs + main control
module)
Color Black
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 70