Huawei FusionModule5000 Product Description

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
52
Indicator
Color
Silk
Screen
Status
Description
Blinking at
long intervals
The networking succeeds.
Alarm
Red
ALM
Off
The BIM is not faulty.
Steady on
⚫
The BIM is faulty.
⚫
Communication with the CIM
times out.
⚫
No network is connected. (The
BIM is waiting to connect to a
network.)
Blinking at
super short
intervals
⚫
Network parameters are being
cleared.
⚫
The BIM is blinking.
⚫
If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
⚫
If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
Networking Switch
Table 3-29 Networking switch description
Name
Definition
Function
Button pressing
Press the button for less
than 5 seconds.
Searches for and joins a network if there is no
network. Initializes the network parameters if
there is a network.
Button holding
down
Hold down the button
for more than 5
seconds.
Clears the current network and resets the
wireless module; disconnect the network.
3.3 Cooling System
Features
⚫
Supports L1/L2 linkage and teamwork control for the indoor units.
⚫
Operates under T1 and T3 environment and extremely low temperature environment.

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English