Huawei FusionServer Pro 2288H V5 - Configuration Overview

7.4.2 Configuration Overview
Configuration Process
Figure 7-26 Initial configuration process
Table 7-5 Process description
Step
Description
Change the initial
passwords.
l Initial password of the default iBMC user
l Initial iBMC U-Boot password
Check the server.
l Ensure that the server version meets site requirements.
l Ensure that no alarm is generated for the server.
Set the iBMC IP
address.
Set an iBMC IP address for the server.
Configure RAID
settings.
Configure the RAID array based on service requirements.
Configure BIOS
settings.
Configure the BIOS settings of the server, including the boot
mode, NIC PXE function, and BIOS password.
Install the OS. Install an OS for the server.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 102