Huawei FusionServer Pro 2288H V5 - Connecting External Cables

Figure 7-13 Installing the CMA
Step 3 Connect the power cables to the PSUs.
For details, see 7.2.6.8 Connecting PSU Cables.
Step 4 Connect a network cable, a VGA cable, and USB devices as required.
Step 5 Power on the server.
For details, see 7.3.1 Power-On Procedure.
Step 6 Check indicator status.
For details, see 2.1.2 Indicators and Buttons.
----End
7.2.6 Connecting External Cables
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 85