Process
Figure 7-32 Process for configuring the BIOS
7.4.7.1 Accessing the BIOS
Procedure
Step 1 Restart the server, and enter the BIOS.
For details, see 9.6 Accessing the BIOS.
----End
7.4.7.2 Setting the System Boot Sequence
If multiple boot devices are configured for the server, you can set the system boot sequence
on the BIOS.
Procedure
Step 1 On the BIOS main screen, choose Boot.
The Boot screen is displayed.
Step 2 Select Boot Type and press Enter.
The Boot Type dialog box is displayed.
Step 3 Select Legacy Boot or UEFI Boot, and then press Enter.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 110
To Next Page
Loading...
