Green Indicator Yellow Indicator Description
Blinking at 1 Hz Blinking at 1 Hz The data on the secondary drive is being
rebuilt.
Off Steady on A member drive in the RAID array is
removed.
Steady on Steady on The drive is faulty.
NVMe Drive Indicators
Figure 2-34 NVMe drive indicators
l If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.
Table 2-10 NVMe drive indicators (VMD enabled)
Drive Active
Indicator (Green)
Drive Fault
Indicator
(Yellow)
Description
Off Off The NVMe drive cannot be detected.
Steady green Off The NVMe drive is working properly.
Blinking green at 2
Hz
Off Data is being read from or written to the
NVMe SSD.
Off Blinking yellow at
2 Hz
The NVMe drive is being located.
Off Blinking yellow at
8 Hz
The data on the secondary NVMe drive is
being rebuilt.
Steady green/Off Steady yellow The NVMe drive is faulty.
l If the VMD function is disabled, NVMe drives support only orderly hot swap.
Table 2-11 NVMe drive indicators (VMD disabled)
Activity
Indicator (Green)
Fault Indicator
(Yellow)
Description
Off Off The NVMe drive cannot be detected.
FusionServer Pro 2288H V5 Server
User Guide
2 Hardware Description
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 36
To Next Page
Loading...
