Huawei HG8240 - Page 158

4. Configure the ONT value-added service.
(1) On the GPON ONU tab page, select an ONT, right-click, and choose Configure
Value-Added Service from the shortcut menu.
(2) Configure the user name and password for PPPoE dialup.
In the navigation tree, choose WAN Device > WAN Device 1 > WAN
Connection > WAN Connection 1 > WAN PPP Interface > WAN PPP
Interface 1. Select WAN PPP Interface 1, and set User Name to
iadtest@pppoe and Password to iadtest. The user name and password must be
the same as those configured on the BRAS.
(3) Click OK. In the dialog box that is displayed, click OK. After the device
automatically restarts, the configuration takes effect.
----End
Result
The PC obtains the IP addresses automatically. After the PPPoE dialup is successfully performed
on the ONT, the PC can automatically obtain the IP addresses allocated by the ONT through
DHCP. Then, the Internet access service is provisioned after websites are entered into Internet
Explorer (IE) address bars of the PC.
Configuration File
vlan 100 smart
port vlan 100 0/19 0
dba-profile add profile-id 10 type4 max 102400
ont-lineprofile gpon profile-id 10
tcont 4 dba-profile-id 10
gem add 1 eth tcont 4
mapping-mode vlan
gem mapping 1 0 vlan 10
commit
quit
ont-srvprofile gpon profile-id 10
ont-port eth 4 pots 2
commit
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-120 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)