Huawei HG8240 - Figure 5-35 Restore Default Configuration; Figure 5-36 Ping Test; Ping Test; Restore Default Configuration

CAUTION
Save the configuration data before restarting the device. For details, see 5.10.5 Configuration
File.
5.10.2 Restore Default Configuration
In the navigation tree on the left, choose System Tools > Restore Default Configuration. In
the pane on the right, click Restore Default Configuration to restore the factory defaults, as
shown in Figure 5-35.
Figure 5-35 Restore Default Configuration
CAUTION
Exercise caution when you perform this operation because it restores factory defaults.
5.10.3 Ping Test
In the navigation tree on the left, choose System Tools > Ping Test. In the pane on the right,
enter the destination IP address for the ping test in the IP Address text box, and then click
Start, as shown in Figure 5-36.
Figure 5-36 Ping test
l If the ping test is successful, The result is displayed as PASS, that is, the ONT can interwork
with the device with the destination IP address.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-40 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)