Huawei HG8240 - Figure 5-11 WAN Configuration - Bridge; Table 5-2 Parameters Related to the WAN in Bridge Mode

Figure 5-11 WAN Configuration - bridge
2. Click Apply to apply the configuration.
Table 5-2 describes the parameters related to the WAN in bridge mode.
Table 5-2 Parameters related to the WAN in bridge mode
Parameter Description
Enable Indicates whether to enable the WAN
connection.
Service List Indicates the service type of the WAN
interface. It is always set to INTERNET.
VLAN ID Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
802.1p Indicates the 802.1p value. It ranges from
0 to 7.
MultiCast VLAN ID The multicast VLAN ID ranges from 1 to
4094.
The multicast VLAN ID must be the same
as the multicast VLAN ID on the OLT.
Bridge Type It can be set to IP or PPPoE.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-10 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)