Huawei HG8240 - Operation Guide on the XML Configuration File (on the U2000); Figure 3-11 Importing the XML Configuration File

Figure 3-11 Importing the XML configuration file
4. The configuration will take effect after the ONT restarts automatically.
----End
3.6.2 Operation Guide on the XML Configuration File (on the
U2000)
This topic describes how to issue the XML configuration files on the U2000.
Prerequisite
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see 3.4.1.1 Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI).
Context
Issuing the XML configuration file on the U2000 applies to the following two typical scenarios:
l Configuring an ONT
l Configuring ONTs in batches
Procedure
l Configure an ONT.
1. Export the XML configuration file.
(1) In the Physical Map navigation tree on the Main Topology tab page, double-
click the target OLT, or select the target OLT, right-click, and choose NE
Explorer.
(2) In the navigation tree, choose GPON > GPON ONU.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-234 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)