Huawei HG8240 - Figure 3-8 Login Interface

To Next Page

To Previous Page

Item Description

IP address and subnet mask of the PC Configure the IP address of the PC to be in

the same subnet as the LAN IP address of the

HG8240/HG8245/HG8247.

For example:

l IP address: 192.168.100.100

l Subnet mask: 255.255.255.0

Procedure

Step 1 Use a network cable to connect the LAN port of the HG8240/HG8245/HG8247 to a PC.

Step 2 Ensure that the Internet Explorer (IE) of the PC does not use the proxy server. The following

section considers IE 6.0 as an example to describe how to check whether the IE uses the proxy

server.

1. Start the IE, and choose Tools> > Internet Options from the main menu of the IE window.

Then, the Internet Options interface is displayed.

2. In the Internet Options interface, click the Connections tab, and then click LAN

settings.

3. In the Proxy server area, ensure that the Use a proxy server for your LAN (These settings

will not apply to dial-up or VPN connections). check box is not selected (that is, without

the "√" sign). If the check box is selected, deselect it, and then click OK.

Step 3 Set the IP address and subnet mask of the PC. For details, see Table 3-13.

Step 4 Log in to the Web configuration interface.

1. Enter http://192.168.100.1 in the address bar of IE (192.168.100.1 is the default IP address

of the HG8240/HG8245/HG8247), and then press Enter to display the login interface, as

shown in Figure 3-8.

Figure 3-8 Login interface

2. In the login interface, enter the use name and password, and select your preferred language.

For details about default settings of the user name and password, see Table 3-13. After the

password authentication is passed, the Web configuration interface is displayed.

----End

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-184 Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Other manuals for Huawei HG8240