Huawei HG8240 - DMZ Configuration; Figure 5-22 Static Route Configuration; Forward Rules; Table 5-9 Parameters Related to the Static Route

Figure 5-22 Static Route Configuration
2. Click Apply to apply the configuration.
Table 5-9 describes the parameters related to the static route.
Table 5-9 Parameters related to the static route
Parameter Description
Destination Network
Address
Indicates the destination IP address of the static route.
Subnet Mask Indicates the subnet mask of the static route.
Gateway IP Address Indicates the gateway IP address of the static route.
Interface Indicates the WAN interface that the route travels through.
5.7 Forward Rules
This topic describes how to configure the DMZ, port mapping, and port trigger through the Web
page.
5.7.1 DMZ Configuration
5.7.2 PortMapping Configuration
5.7.3 PortTrigger Configuration
5.7.1 DMZ Configuration
1. In the navigation tree on the left, choose Forward Rules > DMZ Configuration. In the
pane on the right, click New. In the dialog box that is displayed, set the parameters related
to the DMZ, as shown in Figure 5-23.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 5 Web Page Reference
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-25