Huawei HG8240 - Configuring the H.248-Based Voice Service through the U2560

To Next Page

To Previous Page

Step 8 Click OK after the configuration.

----End

Result

l User 1 with telephone number 88001234 can call user 2 with telephone number

88001235, and the communication between them is normal. The communication is also

normal for user 2's calling user 1.

l Check whether the voice communication between users using different ONTs is normal.

3.5.5 Configuring the H.248-based Voice Service Through the U2560

This topic provides an example of how to configure the H.248-based voice service through the

U2560.

Prerequisite

l The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see 3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI).

l The ONT is auto discovered on the U2560. For details, see 3.5.1.1 Commissioning

Interoperation Between the U2560 and the ONT Through the Web Page.

l Two telephone sets must be available and each must be connected to ports TEL1 and TEL2

respectively on the ONT.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-218 Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Other manuals for Huawei HG8240