Huawei HG8240 - Configuration File; Figure 5-37 Log; Figure 5-38 Configuration File; Log

l If the ping test fails, The result is displayed as FAIL, that is, the ONT cannot interwork
with the device with the destination IP address.
5.10.4 Log
In the navigation tree on the left, choose System Tools > Log. In the pane on the right, click
Download log File. In the dialog box that is displayed, click Save, specify the path of saving
the log file, and save the file to the local disk, as shown in Figure 5-37.
Figure 5-37 Log
5.10.5 Configuration File
In the navigation tree on the left, choose System Tools > Configuration File. In the pane on
the right, click the button as required, as shown in Figure 5-38.
Figure 5-38 Configuration File
l Click Save Configuration to save the configuration file to the flash memory. This prevents
data loss due to the restart of the device.
l Click Download Configuration File. In the dialog box that is displayed, click Save, specify
the path of saving the configuration file, and then back up the file to the local disk.
l Click Browse following the Configuration File text box. In the dialog box that is displayed,
select the configuration file to be uploaded. Click Upload Configuration File to upload
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 5 Web Page Reference
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-41