Huawei HG8240 - Figure 3-9 Flowchart for Commissioning Interoperation between the U2560 and the ONT through the Web Page

Parameter Data Description
User name of a
requested
connection
server It must be the same as that planned on the U2560.
Password of a
requested
connection
server It must be the same as that planned on the U2560.
Flowchart
Figure 3-9 shows the flowchart for commissioning interoperation between the U2560 and the
ONT through the Web page.
Figure 3-9 Flowchart for commissioning interoperation between the U2560 and the ONT
through the Web page
Procedure
Step 1 Configure the parameters of the WAN interface.
1. In the navigation tree on the left, choose WAN > WAN Configuration.
2. In the pane on the right, click New. In the dialog box that is displayed, configure the
parameters of the WAN interface as follows:
l WAN Connection: Enable
l Service List: TR069
l Mode: Route
l VLAN ID: 50
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-203