Huawei HG8240 - Configuring the SIP-Based Voice Service on the Web Page

Step 4 Check the ONT connection status.
In the navigation tree, choose Status > WAN Information. In the right pane, Status is
Connected and the obtained IP address is displayed at IP.
----End
Result
l Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup
is successfully performed, the user can access the Internet.
l Layer 3 Internet access service: The PC is configured to obtain the IP addresses
automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can
automatically obtain the IP addresses allocated by the ONT, and the user can access the
Internet.
3.4.5 Configuring the SIP-based Voice Service on the Web Page
This topic provides an example of how to configure the SIP-based voice service on the Web
page.
Prerequisite
l The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see 3.4.1.1 Enabling Layer 2 Service Channels Between an OLT
and a GPON ONT (on the OLT CLI).
l You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see 3.4.3
Locally Logging in to the Web Interface.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-187