Huawei HG8240 - Page 169

(4) Configure the parameters of the voice WAN port.
a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN
Connection. Select WAN Connection, right-click, and choose Add IP
Connection from the shortcut menu.
b. Select WAN IP Interface 1 and enter (or select) a proper value.
– WAN Interface Name: ONT-VoIP
– WAN Enable: enable
– Connection Type: IP_Routed
– VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-
side VLAN ID configured on the OLT.)
– Priority: 6
– Addressing Type: DHCP
– Service List: VOIP (For configuring the VoIP service, VoIP or a
combination containing VoIP needs to be selected.)
(5) Configure the voice protocol parameters.
In the navigation tree, choose Services > Voice Service > Voice Service 1 >
Interface configuration > Interface 1. Select Interface 1 and select a proper
value.
– Signaling Protocol: H248
– Region: China
– Associate WAN Interface: wan1 (binding the created voice WAN port)
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-131