Huawei HG8240 - Page 200

//After this command is executed, the information about all ONTs
connected to
the GPON port through the optical splitter is displayed.
---------------------------------------------------------------------
---
Number : 1
F/S/P : 0/1/1
Ont SN : 6877687714852900
Password :
VenderID : HWTC
Ont Version : 130C4600
Ont SoftwareVersion : V1R002C00
Ont EquipmentID : 245
Ont autofind time : 2010-12-10 14:59:10
---------------------------------------------------------------------
---
Number : 2
F/S/P : 0/1/1
Ont SN : 6877687714852901
Password :
VenderID : HWTC
Ont Version : 130C4600
Ont SoftwareVersion : V1R002C00
Ont EquipmentID : 245
Ont autofind time : 2010-12-10 14:59:12
---------------------------------------------------------------------
---
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth
6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc
HG8245
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth
6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc
HG8245
NOTE
If multiple ONTs of the same type are connected to a port and the same line profile or service
profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered
ONTs in batches to simplify the operation and increase the configuration efficiency. For
example, the preceding command can be modified as follows:
huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont-
lineprofile-id 10 ont-srvprofile-id 10
(3) (Optional) Bind an alarm profile to the ONT.
In this example, bind the default alarm profile, namely alarm profile 1 to the
ONT.
huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1
huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1
5. Confirm that the ONT goes online normally.
After an ONT is added, run the display ont info command to query the current status
of the ONT. Ensure that Control flag of the ONT is active, Run State is online,
Config state is normal, and Match state is match.
huawei(config-if-gpon-0/1)#display ont info 1 1
---------------------------------------------------------------------
F/S/P :
0/1/1
ONT-ID :
1
Control flag : active //Indicates that the ONT is
activated.
Run state : online //Indicates that the ONT goes online
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-162 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)