c. Select LAN&WANBindNode below WAN IP Interface 1 and set LAN3
Enabled to enable for binding LAN3 to the WAN port.
(6) Click OK to complete the configuration of the new profile.
3. Bind the value-added service profile.
(1) In the Physical Map navigation tree on the Main Topology tab page, double-
click the target OLT, or select the target OLT, right-click, and choose NE
Explorer.
(2) In the navigation tree, choose GPON > GPON ONU.
(3) On the GPON ONU tab page, set the search criteria to find the GPON ONU
records.
(4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the
shortcut menu. In the dialog box that is displayed, choose the created profile, and
click OK to complete profile binding.
----End
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-169
To Next Page
Loading...
