Huawei HG8240 - Page 227

l Set Proxy Server Address below Primary Server to 200.200.200.200.
l Home Domain: softx3000.huawei.com
l Signaling Port: 1_VOIP_R_VID_20
l Region: CN – China
NOTE
l The parameters of the SIP-based voice interface must be consistent with the corresponding
configuration on the softswitch.
l If dual-homing is configured, Proxy Server Address below Secondary Server must be configured.
l If Signaling Port is empty, the parameter value is the same as Media Port. If the upper-layer network
requires isolation of media streams from signaling streams, create different traffic streams for the
media streams and signaling streams on the OLT, create different WAN ports on the ONT, and bind
the created WAN ports to Media Port and Signaling Port.
3. Click Apply to apply the configuration.
Step 3 Configure parameters of the SIP-based voice users.
1. In the navigation tree, choose Voice > VoIP User Configuration.
2. In the right pane, configure parameters of voice user 1 as follows:
l Register User Name: 80001234
l Auth User Name: 80001234@softx3000.huawei.com
l Password: iadtest1
l Associated POTS: 1 (binding port TEL1 on the ONT)
l Select Enable to enable the voice user configuration.
3. Click Apply to apply the configuration.
4. In the right pane, click New to add voice user 2, and configure parameters of voice user 2
as follows:
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-189