Step 4 Configure the voice protocol parameters.
Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 from the
navigation tree. In the right pane, set the parameters as follows:
l Set SignalingProtocol to SIP, indicating that the SIP protocol is used.
l Set Region to CN, indicating the country code of China.
l Set X_HW_PortName to wan2, indicating that the new WAN interface 2 is bound.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-213
To Next Page
Loading...
