– Right-click GEM Port1 in the navigation tree and choose Add GEM
Connection from the shortcut menu. In the dialog box that is displayed, set
the parameter.
– GEM Connection Index: 0 (this parameter is set to 0 automatically)
– VLAN ID: 10 (Internet access user-side VLAN ID)
– Right-click GEM Port1 in the navigation tree and choose Add GEM
Connection from the shortcut menu. In the dialog box that is displayed, set
the parameter.
– GEM Connection Index: 1 (this parameter is set to 1 automatically)
– VLAN ID: 20 (Voice user-side VLAN ID)
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-56 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
To Next Page
Loading...
