(4) Click Next.
(5) Click the Upstream Port tab and add upstream port 0/19/0 as the upstream port
of the VLAN.
(6) Click Done.
2. Add a service virtual port on the OLT side.
(1) On the VLAN tab page, select the record where VLAN ID is set to 200 and click
the ServicePort tab in the lower pane.
(2) In the information list, right-click and choose Add from the shortcut menu.
(3) In the dialog box that is displayed, set the parameters.
– Name: VOIP
– Connection Type: LAN-GPON (when the physical port is a GPON port) or
LAN-EPON (when the physical port is an EPON port)
– Interface Selection: 0/2/1/0/0 (when the connection type is LAN-GPON) or
0/2/1/0 (when the connection type is LAN-EPON)
– Vlan ID: 200 (SVLAN ID)
– Service Type: Multi-Service VLAN
– User VLAN: 20 (CVLAN ID)
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-60 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
To Next Page
Loading...
