Huawei LampSite - 4.2 Installation Process; 4.3 Installing an RHUB

4.2 Installation Process
The RHUB installation involves installing an RHUB module, installing RHUB cables, checking
the RHUB hardware installation, and powering on the RHUB.
Figure 4-11 shows the RHUB installation process.
Figure 4-11 RHUB installation process
4.3 Installing an RHUB
An RHUB can be installed in a cabinet, rack, shelf, or on a wall.
4.3.1 Installing an RHUB in a 19-Inch Cabinet or Rack
This section describes how to install an RHUB in a 19-inch cabinet.
Procedure
l The following describes how to install an RHUB with mounting ears in reverse mode:
NOTE
If necessary, request one more person for assistance.
1. With one hand holding it, align the mounting holes with the installation holes, slowly
push the RHUB into the required position in the cabinet, as shown in Figure 4-12.
LampSite
Installation Guide
4 Installing an RHUB
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18