Huawei LampSite - 4.1 Information About the Installation

4.1 Information About the Installation
This section describes the information to be learnt before RHUB installation, including the
RHUB installation scenarios, clearance, and installation environment.
4.1.1 RHUB Installation Scenarios
An RHUB can be installed in a 19-inch cabinet, rack, shelf, or on a wall.
The RHUB supports that mounting ears are installed in standard mode or reverse mode. The
reverse mode is used by default. The two installation modes are defined as follows:
l In standard mode, the front of the mounting ear is aligned with the RHUB panel, as shown
in Figure 4-1.
Figure 4-1 Installing mounting ears in standard mode
l In reverse mode, the front of the mounting ear is 31 mm away from the RHUB panel, as
shown in Figure 4-2.
Figure 4-2 Installing mounting ears in reverse mode
LampSite
Installation Guide 4 Installing an RHUB
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10