Figure 5-24 Installing a pRRU
----End
5.5 Installing the AC/DC Power Adapter (Optional)
The pRRU can obtain power supply using the AC/DC power adapter, which is used as required.
An AC/DC power adapter is small and can be installed on a wall or pole. When it is installed, a
support for it is required.
Context
l An AC/DC power adapter is small and can be installed on a wall or pole. When it is installed,
a support for it is required.
l The distance between the AC/DC power adapter and the pRRU must be within 1.5 m.
Procedure
l Wall-mounted
1. Use a marker to mark the two anchor points of the support for the AC/DC adapter
which is level to the wall. The interval of the two anchor points is 50 mm, as shown
in Figure 5-25.
LampSite
Installation Guide
5 Installing a pRRU
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
To Next Page
Loading...
