Figure 5-23 Installing the pRRU installation kits
Step 5 Fit the four hooks of the pRRU into the installation kits, as shown in Figure 5-24. If the hooks
are properly installed, a slight clack can be heard.
NOTE
It is recommended that you observe the installation from one side of the pRRU when inserting hooks into
the kits.
LampSite
Installation Guide 5 Installing a pRRU
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
To Next Page
Loading...
