Huawei LampSite - About this Document

Draft C (2014-03-26)
This is a draft release.
Compared with Draft B (2014-02-28), no information is added.
Compared with Draft B (2014-02-28), this issue incorporates the following changes:
Content Change Description
4.4.7 Installing CRPI Optical Cables Added the description of connecting the
CPRI cable to the TX and RX ports of the
optical module crossly.
5.1.4 pRRU Installation Environment
Requirements
The operating temperature of pRRU is
updated.
Compared with Draft B (2014-02-28), no information is deleted.
Draft B (2014-02-28)
This is a draft release.
Compared with draft A (2013-11-30), this issue includes the following new topics:
l 5.2 Obtaining the MAC Address (Optional)
l 5.7.3 Cable Connections
l 6.1 MAC Collection Template
Compared with draft A (2013-11-30), this issue incorporates the following changes:
Content Change Description
Entire document Added descriptions about pRRUs with three
transmission ports. Such pRRUs support
integrated Wi-Fi services.
Added the descriptions about the UMTS, LTE
FDD and UMTS+LTE FDD mode.
About This Document Optimized descriptions about matching
product versions.
4.4.6 Installing an Ethernet Cable Changed the cable name from RHUB-pRRU
Ethernet cable to Ethernet cable.
5.7.6 Installing an Ethernet Cable
Compared with draft A (2013-11-30), this issue excludes the following topics:
l Installing External Antennas (Optional)
l RHUB Exterior
LampSite
Installation Guide
1 Changes in LampSite Installation Guide
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2