Huawei LampSite - 4.4.5 Installing an RHUB PGND Cable

Figure 4-28 RHUB cable installation process
4.4.5 Installing an RHUB PGND Cable
An RHUB PGND cable ensures proper grounding of an RHUB.
Prerequisites
The OT terminals at both ends of the PGND cable are prepared.
Context
The yellow and green or green PGND cable is a single cable. The cross-sectional area of the
PGND cable is 6 mm
2
(0.009 in.
2
). Both ends of the cable are OT terminals, as shown in Figure
1.
Figure 4-29 Exterior of a PGND cable
(1) OT terminal (6 mm
2
[0.009 in.
2
], M4) (2) OT terminal (6 mm
2
[0.009 in.
2
], M6)
LampSite
Installation Guide 4 Installing an RHUB
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33