Installation Manual
Quidway S3900 Series Ethernet Switches Chapter 4 Starting up the Switch at the Initial Boot
Huawei Technologies Proprietary
4-5
* Quidway S3924-SI BOOTROM, Version 221 *
* *
******************************************************************
Copyright(C) 2003-2004 2005, Hangzhouby Huawei-3com Technology. Co., Ltd.
All rights reserved.
Creation date : Aug 4 20042005, 141:4728:2247
CPU type : BCM4704
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB
Mac Address : 0x00e0fc003900
Press Ctrl-B to enter Boot Menu... 0
z By default, the system boots with fast startup mode. If you do not want to change it,
ignore the message “Press Ctrl-B to Enter Boot Menu…”, the system boots
automatically without entering the Boot Menu two seconds later and displays the
following information:
Auto-booting...
Decompress
Image..............................................................
...................................................................
...................................................................
...................................................................
...................................................................
...............................................OK!
Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.
z To change the startup mode to the full (normal) mode, press <Ctrl+B> within two
seconds after the prompt “Press Ctrl-B to Enter Boot Menu…” appears. The
program enters the Boot Menu.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
To Next Page
Loading...
Need help?
General