Huawei Quidway S3900 Series - Page 72

Installation Manual
Quidway S3900 Series Ethernet Switches Chapter 4 Starting up the Switch at the Initial Boot
Huawei Technologies Proprietary
4-6
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Press <9>. The following information appears:
The current mode is fast startup mode!
Are you sure to change it to full startup mode? Yes or No(Y/N)
Make sure you already understand that it takes a relative long time for the system to
boot with full startup mode because it must perform some self-test operations.
Press <Y>. The following information appears:
Setting startup mode...done!
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Press <0>. The system reboots with full startup mode and displays the following
information:
Starting......
******************************************************************
* *
* Quidway S3924-SI BOOTROM, Version 221 *
* *
******************************************************************
Copyright(C) 2003-2004 2005, Hangzhouby Huawei-3com Technology. Co., Ltd.
All rights reserved.
Creation date : Aug 4 20042005, 141:4728:2247
CPU type : BCM4704
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB