EasyManuals Logo

Huawei Quidway S9300 Configuration Guide - Wan Access

Huawei Quidway S9300
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Example
Run the display interface ip-trunk command. If the physical status, link protocol status, IP
address, and load-balancing mode of the IP-Trunk interface are displayed, it means the
configuration succeeds. For example:
<Quidway> display interface ip-trunk 10
Ip-Trunk10 current state : DOWN
Line protocol current state : DOWN
Description:HUAWEI, Quidway Series, Ip-Trunk10 Interface
Route Port,Hash arithmetic : According to SIP-XOR-DIP, Maximal BW: 155M, Current
BW: 0M, The Maximum Transmit Unit is 4470
Internet Address is 2.2.2.2/24 Link layer protocol is nonstandard HDLC
Physical is IP_TRUNK
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes,
0 unicast,0 broadcast,0 multicast
0 errors,0 drops,0 unknownprotocol
Output:0 packets,0 bytes,
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Input bandwidth utilization : 0.00%
Output bandwidth utilization : 0.00%
-----------------------------------------------------
PortName Status Weight
-----------------------------------------------------
Pos2/1/2 DOWN 1
-----------------------------------------------------
The Number of Ports in Trunk : 1
The Number of UP Ports in Trunk : 0
Run the display trunkmembership ip-trunk command. If the member interfaces, number of
members, and number of Up members are displayed, it means the configuration succeeds. For
example:
<Quidway> display trunkmembership ip-trunk 1
Trunk ID: 1
TYPE: pos
Number Of Ports in Trunk = 1
Number Of UP Ports in Trunk = 0
operate status: down
Run the display trunkfwdtbl ip-trunk command. You can view the forwarding table of an IP-
Trunk interface.
<Quidway> display trunkfwdtbl ip-trunk 1
Ip-Trunk1's forwarding table is:
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
3.5 Maintaining HDLC and IP-Trunk Configuration
This section describes how to maintain HDLC. Detailed operations include clearing the statistics
about the HDLC interfaces.
Quidway S9300 Terabit Routing Switch
Configuration Guide - WAN Access 3 HDLC and IP-Trunk Configuration
Issue 02 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47

Table of Contents

Other manuals for Huawei Quidway S9300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S9300 and is the answer not in the manual?

Huawei Quidway S9300 Specifications

General IconGeneral
BrandHuawei
ModelQuidway S9300
CategoryNetwork Router
LanguageEnglish

Related product manuals