S1700 Managed Series Ethernet Switches
Web User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Apply rules to HTTP protocol data of accessing
switch.
Configure trust model and default CoS value of
specified interface.
Perform mapping to CoS value and service grade.
Perform mapping to DSCP value and service grade.
Perform mapping to IP Precedence value and
service grade.
Map different service grades to hardware queue of
switch.
Configure QoS scheduling method and WRR
weighted value.
Create different classes of flows to control network
traffic.
Control the maximal transmission rate of interface,
and limit the output traffic of network.
Add and check static IPv4 routing.
Add and check static IPv6 routing.
Perform user account relevant configuration
Perform 802.1X relevant configuration
Perform the relevant configuration of storm control
and suppression.
Authenticate MAC address of device to achieve
authentication access.
Configure anti-attack settings.
Perform DHCP Snooping configuration.
Perform IP source protection configuration.
Perform dynamic address detection configuration.
Perform illegal message and MAC spoofing
configurations.
Perform interface isolation configuration