S1700 Managed Series Ethernet Switches
Web User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Perform configuration of system authentication and
charging.
Configure RADIUS server relevant parameters.
Perform SSL configuration.
Perform SNMP parameters relevant configuration.
Perform RMON parameters relevant configuration.
Perform LLDP configuration management.
Perform LLDP-MED configuration management.
View hardware information of device, used for
confirming whether system is at normal state or not
when the product of Huawei leaves factory, to
guarantee the versions programmed by all products
through strict inspection of Huawei are proper.
Interface loopback diagnostics: perform loopback
diagnostics to specified interface.
VCT cable diagnostics: perform diagnostics to specified
cable to detect cable faults.
Check parameters of optical interface.
Perform configuration management of system log.
Enable or disable power saving management and
EEE functions.
Add mirroring source and objective interfaces, and
display the configured mirroring session.
Ping test: perform Ping test.
Tracert: perform routing test.
One key information: one key download of configuration,
log and error information.
Save the modified parameters.
1.2.3 Common Buttons
Knowing about following introduction of common buttons can make user convenient to
operate Web management system.
Functions of common buttons are shown as follows.
Table 1-3 Function Description of Common Buttons
Submit input information and confirm current
information provided by system.
To Next Page
Loading...
Need help?
General
