Huawei S1720 User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
144
Enable MAC-based Access Control
Step 1 Click Security> MAC-based Aceess Control.
Step 2 Click Global Parameter Configuration in Tab.
Step 3 Select Enable in Status field.
Step 4 Click Apply button to apply all the changes made.
----End
9.6.2 Interface
Click Security> MAC-based Aceess Control> Interface to configure interface parameter with
MAC Authentication, the configuration page is displayed as follows.
Figure 9-26 Interface
Table 9-19 Parameters of Interface
Item
Description
Interface Name
Interface Number.
Status
The status of MAC authentication on interface.
NOTE: if enabling 802.1X on an interface with MAC-based VLAN
disabled, VLAN assignment works abnormally under host-based mode.
Aging Time
During the specified period, the user who passes the authentication will
always remain the authentication-passed status, and the authenticator
will return to authentication-failed status after a designated time. The
value ranges from 1 to 1440, and the default is 1440 minutes.
Quiet Period
When the user fails the authentication, within the specified period, the
user can not require the authentication again unless the status of user is
manually cleared. If the quiet period is set 0, which means the user who
fails the authentication can repeatedly require authentication. The value
ranges from 0 to 300, and the default is 60 seconds.
Max User
The allowed maximum number of access user on the interface. The
value ranges from 1 to 512, and the default is 256.

Huawei S1720 Specifications

General

Operating Temperature	0°C to 45°C
MAC Address Table	8K
Ports	4 100/1000BASE-X SFP ports
VLAN	4094
Stacking	Not supported
Dimensions	442 mm x 220 mm x 43.6 mm (S1720-28GFR-4P)
Power Supply	AC: 100 V to 240 V, 50/60 Hz
Series	S1700
Type	Fixed
Fixed ports	4 x GE Combo
Storage Temperature	-40°C to +70°C
Operating Humidity	5% to 95% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)