ADSL2+ Specifications Comparison
Table 3-40 Specifications lists of 48-channel ADSL2+ service boards
Specifications H80BCAME H806CAME
Applicable Line ADSL2+ over POTS ADSL2+ over POTS
Physical Layer
Retransmission
(G.INP)
Yes (Supported by V800R009C00 and
later)
No
ADSL2+ Bonding Yes No
INM Yes No
SELT Yes Yes
xDSL MELT No No
Annex Type
l G.992.1 Annex A
l G.992.3 Annex A/L/M (EU32-EU64)
l G.992.5 Annex A/M (EU32-EU64)
l G.992.1 Annex A
l G.992.3 Annex A/L/M (EU32-EU64)
l G.992.5 Annex A/M (EU32-EU64)
Flexible
Configuration Modes
Supports RFC2662, RFC4706, and
TR165. (Users with a super user account
can log in to the system and run the
switch adsl mode to command in
diagnose mode to switch between the
configuration modes. The default
configuration mode is RFC2662.
Considering the current development
trend, it is recommended that you use
TR165, which is more flexible than the
others)
Supports RFC2662, RFC4706, and
TR165. (Users with a super user account
can log in to the system and run the
switch adsl mode to command in
diagnose mode to switch between the
configuration modes. The default
configuration mode is RFC2662.
Considering the current development
trend, it is recommended that you use
TR165, which is more flexible than the
others)
Connector Delander 64-pin Delander 64-pin
Built-in Splitter Yes Yes
Temperature Query
and High-
temperature Alarm
Yes Yes
Automatic Power
Shutdown in Case of
a High Temperature
Yes Yes
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
422
To Next Page
Loading...
Need help?
General
