Huawei SmartAX MA5600T Hardware Description

Position Description
3.3 Power Consumption and
Maximum Frame Size of
Boards
Added the note for the power consumption of the board.
Included the V800R017C00 updates.
Updates in Issue 17 (2016-04-29)
Based on issue 16 (2015-09-30), the document is updated as follows:
Position
Description
3 Board Added the 3.20.6 H80BASPB Board Description, 3.20.7
H80CASPB Board Description and 3.22.11
H80DSDMM Board Description.
3.2 Mapping Between
Boards and Software
Versions
Optimized the description of the card support version.
Updates in Issue 16 (2015-09-30)
Based on issue 15 (2015-07-28), the document is updated as follows:
Position
Description
3.1.2 Board Dimensions Added the dimension of MPWE board.
3.7.3 H801MCUD1 Board
Description
Added the pin assignment of the BITS/TOD port of
H801MCUD1 board.
2.3.3 Configuration MA5600T IEC Service Subrack supports the H802MABH
backplane.
2.6.7 Power Distribution
Principle
Added the MPWE board.
5.4.2 120-ohm Clock Cable Added the pin assignment of the 120-ohm Clock Cable.
Updates in Issue 15 (2015-07-28)
Based on issue 14 (2015-04-30), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English