EasyManuals Logo

Huawei SUN2000-8KTL-M1 User Manual

Huawei SUN2000-8KTL-M1
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
3 Storage
The following requirements should be met if the SUN2000 is not put into use
directly:
Do not unpack the SUN2000.
Keep the storage temperature at –40°C to +70°C and the humidity at 5%–
95% RH.
The SUN2000 should be stored in a clean and dry place and be protected
from dust and water vapor corrosion.
A maximum of eight SUN2000s can be stacked. To avoid personal injury or
device damage, stack SUN2000s with caution to prevent them from falling
over.
Periodic inspections are required during the storage. Replace the packing
materials if necessary.
If the SUN2000 has been long-term stored, inspections and tests should be
conducted by qualied personnel before it is put into use.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 3 Storage
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 24

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SUN2000-8KTL-M1 and is the answer not in the manual?

Huawei SUN2000-8KTL-M1 Specifications

General IconGeneral
Max. Efficiency98.6%
Max. Input Voltage1100 V
Nominal Input Voltage600 V
Number of MPP Trackers2
Max. Output Power8000 W
Nominal Output Frequency50 Hz / 60 Hz
Weight17 kg
Max. apparent AC power8800 VA
Rated AC power8000 W
Operating Temperature Range-25°C to +60°C
CoolingNatural Convection
Protection DegreeIP65
Warranty10 years
Nominal Output Voltage230 V / 400 V

Related product manuals