Figure 5-13 Installing DC input power cables
----End
Removing DC Connectors
Before removing the positive and negative connectors, ensure that the DC switch
is OFF.
To remove the positive and negative connectors from the SUN2000, insert an
open-end wrench into the bayonet and press the wrench with force. Then remove
the DC connectors with caution.
Figure 5-14 Removing DC connectors
5.6 (Optional) Connecting Battery Cables
Prerequisites
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 5 Electrical Connections
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 52
To Next Page
Loading...
