Huawei SUN2000 M0 Series User Manual

Figure 2-8 Working modes
Table 2-3 Working mode description
Working
Mode
Description
Standby The SUN2000 enters Standby mode when the external environment does not
meet the operating requirements. In Standby mode:
● The SUN2000 continuously performs status check and enters the Operating
mode once the operating requirements are met.
● The SUN2000 enters Shutdown mode after detecting a shutdown command or
a fault after startup.
Operating In Operating mode:
● The SUN2000 converts DC power from PV strings into AC power and feeds the
power to the power grid.
● The SUN2000 tracks the maximum power point to maximize the PV string
output.
● If the SUN2000 detects a fault or a shutdown command, it enters the
Shutdown mode.
● The SUN2000 enters Standby mode after detecting that the PV string output
power is not suitable for connecting to the power grid for generating power.
Shutdown ● In Standby or Operating mode, the SUN2000 enters Shutdown mode after
detecting a fault or shutdown command.
● In Shutdown mode, the SUN2000 enters Standby mode after detecting a
startup command or that the fault is rectied.
SUN2000-(3KTL-10KTL)-M0
User Manual 2 Overview
Issue 06 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 16

Huawei SUN2000 M0 Series Specifications

General

Rated AC Output Power	3000W
European Efficiency	96.7%/97%/97%/97.3%/97.5%/97.8%
Communication	RS485, Wi-Fi
Protection Degree	IP65
Weight	17 kg
Dimensions	440 x 650 x 220 mm
Max. efficiency	98.6%
MPPT voltage range	200-1000V
No. of MPPTs	2
Operating temperature range	-25°C to +60°C
Cooling method	Natural convection
Protection rating	IP65
AC output voltage	230V