D Setting Voltage Rise Suppression Q-U
Curve
Scenario 1: Smart Dongle Networking Scenario
Prerequisites
You have logged in to the app as installer. The initial password is 00000a. Use the
initial password upon
rst power-on and change it immediately after login. To
ensure account security, change the password periodically and keep the new
password in mind. Not changing the initial password may cause password
disclosure. A password left unchanged for a long period of time may be stolen or
cracked. If a password is lost, devices cannot be accessed. In these cases, the user
is liable for any loss caused to the PV plant.
Procedure
Step 1 Set voltage rise suppression Q-U curve parameters.
SUN2000-(3KTL-10KTL)-M0
User Manual D Setting Voltage Rise Suppression Q-U Curve
Issue 06 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 97
To Next Page
Loading...
