Humminbird SOLIX - Change the Chart Mode

67
Chart Options
CHANGE THE CHART MODE (NA
VIONICS ONLY
)
U
se the instructions in this section to switch the Chart View from 2D to 3D.
NOTE: Navionics must be selected as the map source to enable this feature.
Change the Chart Mode
Touch Screen
1. With two fingers, tap the screen twice.
OR
1. Tap Chart in the status bar.
2. Select Chart Mode.
3. Select a menu option.
Keypad
1. Press the MENU key.
2. Select Chart Mode.
3. Select a menu option.