Hunter Douglas Applause - CARE AND MAINTENANCE; Removing and Cleaning the Shade

CARE
15
Removing the Shade, If Necessary

Lower the shade approximately 4".

While holding the headrail,
push back on the bottom tab
of the installation bracket to
release the bottom edge of
the headrail.

Then roll the back of the
headrail down and out from
the bracket.
Cleaning Procedures
Hunter Douglas Duette
®
and Applause
®
Honeycomb Shades are made of anti-static,
dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following
cleaning options are available.
Dusting

Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Vacuuming
CAUTION: Do not vacuum Elan
®
fabrics.

For deeper cleaning, vacuum gently with a brush attachment.
Compressed Air/Hair Dryer (Cool Setting)

Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.
Spot-Cleaning
CAUTION: Do not spot-clean Alexa, Alexa Metallic
™
, Apollo
™
, Calypso
™
, Commercial, Elan,
Applause Esprit
™
, India Silk, Jardin, Leela, Macon
™
, and all Batiste fabrics.

Prepare a solution of warm water and a mild detergent.

Dampen a clean cloth in the solution and wring it out.

Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.

Allow the shade to dry in the completely lowered (or closed) position.
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab