Hunter Douglas Vignette Installation

OPERATION
13
Operate the Shade
EasyRise
™
Shades
IMPORTANT: If the cord tensioner moves with the cord, you have not secured it to the wall
or window frame. You must do so for the shade to operate properly. See the Universal Cord
Tensioner Installation Instructions in the kit included with yourshade.
To Lower the Shade:
■ Pull the front cord of the cord loop to lower the
shade from the top. Continue to pull until the
shade is fully lowered and rotated back toward
the window.
To Raise the Shade:
■ Pull the rear cord of the cord loop to raise the
shade. Continue to pull the rear cord to raise
the shade into theheadrail.
LiteRise
®
Shades
For better support and smoother operation, use the handle
when raising and lowering the shade.
To Lower the Shade:
■ Gently pull down on the bottom rail handle. The shade will
retract slightly to the desired position.
To Raise the Shade
:
■ Gently pull down on the handle to engage the shade. Then
steadily raise the shade into the headrail or retract the
shade to the desired position.
Lower
Raise
Raise
F
irst Pull Down
Slightly
Lower

Hunter Douglas Vignette Specifications

General

Opacity Levels	room darkening
Control Options	Manual, Motorized
Energy Efficiency	Yes
UV Protection	Yes
Width	Custom
Height	Custom
Product Type	Roman Shades
Style	Modern, Traditional
Material	Fabric
Operation	Cordless
Customization	Yes
Light Control	Adjustable
Privacy	Adjustable